Guillotine Shear

Dafu build and supply three different type plate shearing machine, they are hydraulic guillotine shear, hydraulic swing beam shearing machine and CNC guillotine shear. Each type plate shearing machines are built and inspected according to highest level standard in the industry, especially hydraulic guillotine shear, which is widely sold worldwide thanks to its simple design and stability, Dafu choose high quality components from reputed manufacturer for our plate shearing machines.

For hydraulic guillotine shear QC11Y series, Dafu use advanced and mature technology from Singapore to build top quality hydraulic guillotine shear in the industry. Dafu’s hydraulic guillotine shear is featured in: 1) Germany imported bite type tube fittings to avoid leakage of oil piping, this design is much better than welded piping, standard valve is supplied by Italy Aron and Germany Bosch; 2) gap of cutting tool is adjustable manually at two backside of machine, cutting degree is also adjustable from 1-3 degree according to actual thickness of plate to cut; 3) front control panel control back gauge feed in the range 10-750mm, there is optional laser guard cover available as optional; 4) safety foot switch, when step out of foot switch, upper cutting tool will go back to upper limit position automatically; 5) separated plate hold downs system, stress of hold downs is adjustable; 6) double oil pump system of cutting oil pump and plate hold downs oil pump; 7) available Italy HT071 and NC89 single axis controller.

For economical hydraulic swing beaming shearing machine, whole machine use integral welded steel plate structure, hydraulic transmission, energy accumulator to drive move cutting tool back up to upper limit position, easy operation and stable performance; There is indicator of gap of cutting tool, easy to adjust; there is light alignment unit to control cutting travel, easy and convenient to adjust; working table is equipped with rolling balls to hold down plate with scratch of plate to cut, reduce frictional resistance; there are NC controller available as optional for economical hydraulic swing beam shearing machine, with NC controller, machine will display position of back stopper, multi-steps programming ability to realize continuous motion of back stopper and automatic adjustment of back stopper position; cutting counting function to indicate cutting numbers at real time, power off memory, programming and parameters setting; adopt imported ball screw, linear guideway to guaranty accuracy of positioning, to increase cutting position; There are E20, E200 and MD20, DAC310 NC controller available.

For advanced CNC guillotine shear, it use integral welded structure to guaranty rigidity and strength of machine, adopt advance Netherland Delem DAC360 controller, automatic accurate back stopper positioning, cutting travel, cutting angle, cutting tool gap and quantity of workpieces; four edges design of down cutting tools to prolong life of cutter; back stopper is equipped with linear guideway, precious ball screw, Max travel could be 1000mm; Servo motor control to increase positioning accuracy; Integral hydraulic system to overcome leakage of oil, and reduce piping to increase stability of working.

  • Controler:DAC360
    Cut Thickness:6mm
    Cut Length:2500/3200/4000mm
    Cutting Angle:0.5°-2.5° adjustable

    CNC Shearing Machine ZYS-6

    Controler:DAC360
    Cut Thickness:8mm
    Cut Length:2500/3200/4000mm
    Cutting Angle:0.5°-2.5° adjustable

    CNC Guillotine Shear Machine ZYS-8

    Controler:DAC360
    Cut Thickness:10mm
    Cut Length:2500/3200/4000mm
    Cutting Angle:0.5°-2.5° adjustable

    CNC Guillotine Shears ZYS-10

    Controler:DAC360
    Cut Thickness:12mm
    Cut Length:2500/3200/4000mm
    Cutting Angle:0.5°-2.5° adjustable

    CNC Sheet Metal Guillotine Shears ZYS-12

    Controler:DAC360
    Cut Thickness:16mm
    Cut Length:2500/3200/4000mm
    Cutting Angle:0.5°-2.5° adjustable

    CNC Guillotine Shear ZYS-16